chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Heater-A/C Control Lamp Replacement|Page 5268 > < Calibration -- May Be Needed After Replacing Control Unit|Page 5265
Page 1
background image

Control Assembly: Service and Repair
Heater-A/C Control Lamp Replacement

REMOVAL

Battery Negative Cable

1. Disconnect and isolate the battery negative cable.

HVAC Control Lamps

2. Remove radio bezel and HVAC Control.
3. Remove rear cover from HVAC control.
4. Rotate bulb socket counterclockwise one quarter turn.
5. Pull bulb socket from HVAC.

INSTALLATION

For installation, reverse the above procedures.

Heater-A/C Control Lamp Replacement|Page 5268 > < Calibration -- May Be Needed After Replacing Control Unit|Page 5265