Town & Country LWB FWD V6-3.8L VIN L (1999)
Headlamp Switch: Service and Repair
Headlight Switch
REMOVAL
Battery Negative Cable
1. Disconnect and isolate the battery negative cable.
Headlamp Switch
2. Remove instrument cluster bezel. Refer to Instrument Cluster Bezel Replacement.
3. Remove screws holding the headlamp switch bezel to cluster bezel.
4. Disconnect the wire connectors from the headlamp switch and wire connector from the power mirror switch.
5. Remove headlamp switch bezel from cluster bezel.
INSTALLATION
For installation, reverse the above procedures.
