Town & Country LWB FWD V6-3.8L VIN L (1999)
Glove Box Lamp Switch: Service and Repair
REMOVAL
Battery Negative Cable
1. Disconnect and isolate the battery negative cable.
Glove Box Lamp And Switch
2. Open glove box door.
3. Using a trim stick (special tool #C-4755), lightly pry glove box lamp/switch from instrument panel.
4. Disengage wire connector from glove box lamp and switch.
5. Remove glove box lamp and switch.
Glove Box Lamp
6. Remove lamp.
INSTALLATION
For installation, reverse the above procedures.
