Town & Country LWB FWD V6-3.8L VIN L (1999)
4. Remove retainer clip from throttle cable and grommet at dash panel.
5. From the engine compartment, pull the throttle cable out of the dash panel grommet. The grommet should remain in the dash panel.
6. Remove the throttle cable from throttle bracket by carefully compressing both retaining ears simultaneously. Then gently pull the throttle cable
from throttle bracket.
INSTALLATION
1. From the engine compartment, push the housing end fitting into the dash panel grommet.
2. Install the cable housing (throttle body end) into the cable mounting bracket on the engine.
3. From inside the vehicle, hold up the pedal and install throttle cable and cable retainer in the upper end of the pedal shaft.
4. At the dash panel, install the cable retainer clip between the end of the throttle cable fitting and grommet.
5. From the engine compartment, rotate the throttle lever wide open and install the throttle cable.
