Town & Country LWB FWD V6-3.8L VIN L (1999)
Seat Memory Switch: Service and Repair
REMOVAL
Negative Battery Cable
1. Disconnect and isolate the battery negative cable.
2. Insert a trim stick (special tool #C-4755), then through the access slot located at the front forward edge of the switch bezel and gently pry outward.
3. Gently pry the switch out from the door trim panel opening.
4. Disconnect wire connector from the back of switch.
5. Remove switch from door trim panel and vehicle.
INSTALLATION
For installation. reverse the above procedures.
