Town & Country SWB FWD V6-3.3L VIN G Flex Fuel (2000)
Antenna Mast: Service and Repair
REMOVAL
1. Remove glove box from instrument panel, refer to Instrument Panel and Systems for proper procedures.
Antenna Cable
2. Disconnect antenna cable connector from extension cable.
3. Remove right kick trim panel.
4. Remove fender splash shield.
5. Disengage rubber grommet insulator from door hinge pillar.
6. Pull antenna cable through hinge pillar into open between door hinges.
7. Hoist and support vehicle on safety stands.
8. Remove front wheel
9. Remove front wheelhouse splash shield
Antenna Mast
10. Remove antenna mast from antenna base.