Town & Country SWB FWD V6-3.3L VIN G Flex Fuel (2000)
Front Door Hinge: Service and Repair
HINGE
REMOVAL
1. Release front door latch and open door.
2. Support door on suitable lifting device.
3. Remove bolts holding front door to door hinge.
4. Remove bolts holding hinge to pillar.
5. Remove door hinge from vehicle.
INSTALLATION
CAUTION: When installing a new hinge, make sure that the head of each hinge pin is fully seated into the door hinge. Also, remove the plastic
shipping clip and replace it with the correct metal retaining clip once the hinge pin is seated.
1. Paint hinge prior to installation, if necessary.
2. Position door hinge on vehicle.
3. Install bolts to hold hinge to pillar.
4. Install bolts to hold front door to door hinge.
5. Align door to achieve equal spacing to surrounding body panels. Panels should be flush across all gaps.
6. Verify door alignment and operation. Adjust as necessary.