Town & Country SWB FWD V6-3.3L VIN G Flex Fuel (2000)
Fig. 6
Fig. 7
5. With sliding door ajar, disengage clip holding rear latch link to latch/lock control (Fig. 6) and (Fig. 7).
6. Place a flat head screw driver between metal clip ears and bottom of link.
NOTE: Rotate screw driver to remove link.
CAUTION: Replace the latch/lock control if any of the metal clips on the latch/lock control are bent or broken. DO NOT attempt to
repair the clips to retain the links.
7. Remove rear latch link from latch/lock control.
