Town & Country SWB FWD V6-3.3L VIN G Flex Fuel (2000)
6. Close hood. Do not latch. Remove outboard screws.
7. Lift cowl cover upward enough to gain access to right washer hose.
8. Disconnect washer hose from right washer nozzle.
9. Close hood. Do not latch.
10. Remove cowl cover from vehicle.
INSTALLATION
1. Place cowl cover in position. The cowl cover should be aligned to 4 mm (0.160 in.) gap to the front fenders and flush across the top surfaces along
the fender.
2. Open hood.
3. Connect washer hose from right washer nozzle.
4. Install wing nuts attaching front of cowl cover to wiper module.
5. Close hood.
6. Check for proper spray pattern from washer nozzles.
