chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Procedures|Page 5920 > < Procedures|Page 5918
Page 5
background image

2. Align guide pins.
3. Push inward at top of cover to engage latch and fastener.

SHORT WHEEL BASE

1. Position jack storage cover to vehicle.
2. Snap storage cover latch into position on quarter trim panel.
3. Close quarter trim panel bin storage cover.

Liftgate Sill Scuff Plate

LIFTGATE SCUFF PLATE

REMOVAL

Fig. 11

1. Disengage hidden clips holding sill plate to liftgate door opening sill (Fig. 11) .
2. Remove sill plate from vehicle.

INSTALLATION

1. Place sill plate in position on vehicle.
2. Align locator rib into recess in liftgate sill.
3. Engage hidden clips to hold sill plate to liftgate door opening sill.

A-Pillar Trim

A-PILLAR TRIM

REMOVAL

1. Remove the assist handle if equipped.

Procedures|Page 5920 > < Procedures|Page 5918