Town & Country SWB FWD V6-3.3L VIN G Flex Fuel (2000)
Power Door Lock Actuator: Service and Repair
Liftgate Lock Motor Replacement
REMOVAL
Negative Battery Cable
1. Disconnect and isolate the negative battery cable.
2. Remove liftgate trim panel.
Liftgate Lock Motor
3. Remove bolts holding liftgate lock motor to liftgate.
4. Disconnect the wire connector from power lock motor.
5. Disconnect the liftgate lock motor from outside handle lock link.
6. Remove the liftgate lock motor from vehicle.
INSTALLATION
For installation, reverse the above procedures.
