Town & Country SWB FWD V6-3.3L VIN G Flex Fuel (2000)
Power Seat Switch: Description and Operation
Memory Seats
SEAT AND RECLINER SWITCHES
The seat and recliner switch assembly is mounted outboard on the seat side-shield. Press and hold the desired seat or recliner switch to effect
movement.
The Memory Seat/Mirror Module (MSMM) will drive a maximum of 2 motors at a time in a given direction. If conflicting directions are
requested, the priority for response will be as follows:
-
Seat Track Rearward
-
Seat Front Down
-
Seat Rear Down
-
Recliner Rearward
-
Seat Track Forward
-
Seat Front Up
-
Seat Rear Up
-
Recliner Forward
The inputs from these switches to the MSMM is a current limited battery source fed by the MSMM. This protects the MSMM printed circuit board
traces from acting as fuses. All of these switch contact inputs to the MSMM are normally closed to ground, except when actuated.
Soft stops are incorporated to prevent the motor from being driven into a stall. Should the seat have restricted travel, refer to Resetting Soft Stops.
