Town & Country SWB FWD V6-3.3L VIN G Flex Fuel (2000)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Disassembly and Assembly
REMOVAL
NOTE: To replace the Hydraulic Control Unit (HCU) or the Controller Antilock Brake (CAB) on this vehicle, the entire Integrated Control Unit
(ICU) needs to be removed from the vehicle. The CAB can then be separated from the HCU. Do not attempt to replace the CAB with the ICU
mounted in the vehicle.
1. Remove the ICU from the vehicle. Refer to Integrated Control Unit, Service and Repair, Removal and Installation.
Pump/Motor To CAB Wiring Harness
2. Disconnect the pump/motor wiring harness from the CAB.
CAB Attaching Bolts
3. Remove the 4 bolts attaching the CAB to the HCU.
