Town & Country SWB FWD V6-3.3L VIN G Flex Fuel (2000)
17. If vehicle is equipped with speed control, install the speed control servo and bracket on the battery tray. Install and securely tighten bolt attaching
bracket to battery tray.
18. If vehicle is equipped with speed control, install the wiring harness connector on the speed control servo. Then connect the vacuum lines onto the
speed control servo and vacuum reservoir on battery tray.
19. Install the air inlet resonator and hoses as an assembly on the throttle body and air cleaner housing. Securely tighten hose clamp at air cleaner
housing and throttle body.
20. Install the battery and the battery thermal guard.
21. Install the battery cables on the battery.
22. Check the operation of the stop lamp switch and adjust if necessary.
