Town & Country SWB FWD V6-3.3L VIN G Flex Fuel (2000)
Wheel Speed Sensor: Service and Repair
Front
REMOVE
1. Raise vehicle on jack stands or centered on a frame contact type hoist. See Hoisting in Maintenance for the required lifting procedure to be used
for this vehicle.
2. Remove the tire and wheel assembly from the vehicle.
3. Remove the 2 screws attaching front channel bracket and grommet retainer to the outer frame rail.
CAUTION: When disconnecting the wheel speed sensor from vehicle wiring harness, be careful not to damage pins on connector.
4. Pull speed sensor cable grommet and connector through the hole in the strut tower. Disconnect speed sensor cable from vehicle wiring harness.
