Town & Country SWB FWD V6-3.3L VIN G Flex Fuel (2000)
Cruise Control Switch: Service and Repair
REMOVAL
1. Release hood latch and open hood.
2. Disconnect battery negative cable.
3. Remove airbag/horn pad from steering wheel, refer the Restraint Systems for the proper procedures.
4. Disconnect wire connector from horn switch, airbag, and speed control switches.
Speed Control Switches
5. Remove screws holding speed control switch to airbag/horn pad.
6. Separate speed control switch from airbag/horn pad.
INSTALLATION
1. Install speed control switch to the airbag/horn pad.
2. Install screws holding speed control switch to airbag/horn pad.
3. Connect wire connector to the horn switch, airbag, and speed control switches.
4. Install airbag/horn pad to steering wheel, refer the Restraint Systems for the proper procedures.
5. Connect battery negative cable.
