Town & Country SWB FWD V6-3.3L VIN G Flex Fuel (2000)
Fig. 85
7. The notch or groove on top of piston must be pointing toward front of engine (Fig. 85).
8. Install rod caps. Install nuts on cleaned and oiled rod bolts and tighten nuts to 54 Nm (40 ft. lbs.) Plus 1/4 turn.
9. Repeat procedure for each piston and rod installation.
10. Install cylinder heads and oil pan.
11. Fill engine crankcase with proper oil to correct level.
12. Connect negative cable to battery.
