Town & Country SWB FWD V6-3.3L VIN G Flex Fuel (2000)
Engine Mount: Service and Repair
Rear Mount
REAR MOUNT
REMOVAL
1. Raise vehicle on hoist.
2. Support the transmission with a transmission jack so it will not rotate.
3. Remove the insulator through bolt from the mount and rear suspension crossmember.
4. Remove the four transmission mount fasteners and remove the mount.
INSTALLATION
Fig. 38
1. Reverse the removal procedure for installation. Refer to (Fig. 38). Tighten through bolt to 75 Nm (55 ft. lbs.).