Town & Country SWB FWD V6-3.3L VIN G Flex Fuel (2000)
Dome Lamp Bulb: Service and Repair
Rail Lamp Module Bulb Replacement
REMOVAL
Rail Lamp Module Lens
1. Using a small screw driver, pry stationary end of rail lamp lens from rail lamp module.
2. Remove lens tab from between rail lamp module and rail lamp switch.
3. Remove lens from lamp.
Rail Lamp Module Bulb
4. Pull bulb from lamp.
INSTALLATION
1. Push bulb into bulb contacts in rail lamp module.
2. Insert tab on lamp lens between rail lamp module and rail lamp switch.
3. Snap lens onto lens pivots on module.
