Town & Country SWB FWD V6-3.3L VIN G Flex Fuel (2000)
Headlamp Switch: Service and Repair
Headlamp Switch
REMOVAL
Battery Negative Cable
1. Disconnect and isolate the battery negative cable.
Headlamp Switch
2. Remove instrument cluster bezel. Refer to Instrument Cluster Bezel Removal and Installation.
3. Remove screws holding the headlamp switch bezel to cluster bezel.
4. Disconnect the wire connectors from the headlamp switch and wire connector from the power mirror switch.
5. Remove headlamp switch bezel from cluster bezel.
INSTALLATION
For installation, reverse the above procedures.
