Town & Country SWB FWD V6-3.3L VIN G Flex Fuel (2000)
Marker Lamp Bulb: Service and Repair
REMOVAL
1. Remove screw attaching side marker lamp to fascia.
Front Side Marker Lamp Bulb
2. Remove housing by pulling rearward and away from fascia.
3. Rotate lamp socket counterclockwise one quarter turn.
Front Parking and Turn Signal Lamp Bulb(s)
4. Pull bulb socket from the rear of lamp.
INSTALLATION
1. Insert bulb into socket.
2. Insert bulb socket into rear of housing.
3. Rotate park and turn signal socket clockwise one quarter turn.
4. Verify bulb operation.
5. Install screw attaching side marker lamp.