Town & Country SWB FWD V6-3.3L VIN G Flex Fuel (2000)
Parking Light Bulb: Service and Repair
REMOVAL
1. Remove screw attaching side marker lamp to fascia.
Front Parking and Turn Signal Lamp
2. Remove housing by pulling outward and away from the fascia.
3. Remove screw attaching parking and turn signal lamp housing.
Front Parking and Turn Signal Lamp Bulb(s)
4. Rotate lamp socket(s) counterclockwise one quarter turn.
5. Pull bulb socket(s).
6. Pull bulb from socket(s).
INSTALLATION
1. Insert bulb into socket.
2. Insert bulb socket into housing.
3. Rotate parking and turn signal socket clockwise one quarter turn.
4. Verify bulb(s) operation.
5. Install screw attaching parking and turn signal lamp housing.
6. Install screw attaching side marker lamp.
