Town & Country SWB FWD V6-3.3L VIN G Flex Fuel (2000)
Drive Belt: Service and Repair
Cleaning and Inspection
CLEANING
Clean all foreign debris from belt pulley grooves. The belt pulleys must be free of oil, grease, and coolants before installing the drive belt.
INSPECTION
Belt replacement under any or all of the following conditions is required:
-
Excessive wear
-
Frayed cords
-
Severe glazing
Fig. 56
Poly-V Belt system may develop minor cracks across the ribbed side. These minor cracks are considered normal and acceptable. Cracks parallel are
not (Fig. 56).
NOTE: Do not use any type of belt dressing or restorer on Poly-V Belts.
