Town & Country SWB FWD V6-3.3L VIN G Flex Fuel (2000)
Air Bag: Service and Repair
Passenger Airbag
Negative Battery Cable
WARNING: DISCONNECT AND ISOLATE THE BATTERY NEGATIVE CABLE BEFORE BEGINNING AIRBAG SYSTEM
COMPONENT SERVICE PROCEDURES THIS WILL DISABLE THE AIRBAG SYSTEM. FAILURE TO DISCONNECT THE BATTERY
COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY. ALLOW SYSTEM CAPACITOR
TO DISCHARGE FOR TWO MINUTES BEFORE REMOVING AIRBAG COMPONENTS.
DEPLOYED MODULE
REMOVAL
1. Clean powder residue from interior of vehicle.
2. Remove instrument panel.
3. Remove all reusable components from the upper instrument panel.
INSTALLATION
Transfer all reusable components to the new the upper instrument panel.
1. Install new Passenger Airbag Module into instrument panel.
2. Install airbag module attaching screws to the instrument panel.
3. Install Instrument panel.
4. Through access holes in instrument panel above glove box opening, install screws holding airbag to back of panel.
