Town & Country SWB FWD V6-3.3L VIN G Flex Fuel (2000)
Seat Memory Switch: Description and Operation
The Memory Selector Switch is mounted on the driver's door trim panel within easy reach of the driver. It provides a means to set or recall either of two
positions of seat, recliner, and side view mirrors as chosen by the driver.
The inputs from this switch to the MSMM is a ground level signal.
1. Adjust the seat, recliner and side view mirrors to the desired position.
2. Press momentarily and release memory switch.
3. Press momentarily and release the memory switch 1 or 2. Do NOT press any switch for 10 seconds.
For Fob linking, see Remote Keyless Entry (RKE) Data Link.
4. To program the second driver's position, follow the above sequence.
5. To recall either of the programmed positions momentarily press and release either memory switch 1 or 2.
