Town & Country SWB FWD V6-3.3L VIN G Flex Fuel (2000)
Combination Switch: Service and Repair
WARNING: BEFORE SERVICING A STEERING COLUMN EQUIPPED WITH AN AIRBAG REFER TO RESTRAINT SYSTEMS FOR
PROPER AND SAFE SERVICE PROCEDURES.
REMOVAL
1. Release hood latch and open hood.
Battery Negative Cable
2. Disconnect and isolate battery negative cable.
3. Remove upper and lower steering column shrouds.
Turn Signal Multi-Function Switch
4. Disconnect wire connector from back of turn signal multi-function switch.
5. Remove screws holding turn signal switch to steering column adapter collar.
6. Remove turn signal switch.
INSTALLATION
1. For installation, reverse the above procedures.
2. Verify switch operation by placing the control stalk in either the right or left position and turning the steering wheel to ensure the automatic
cancellation of the switch.
