Town & Country SWB FWD V6-3.3L VIN G Flex Fuel (2000)
Alignment: Specifications
Front Alignment
Camber
All Except w/ P205/75R 15,
Preferred Settings
+0.15 deg
All specifications are given in degrees.
P215/65R 16 & P215/60 17 Tire
All wheel alignments are to be set at
curb height. Refer to Curb Height
Measurement in Service Procedures.
Acceptable Settings
-0.25 to +0.55 deg
All w/ P205/75R 15, P215/65R
Preferred Settings
+0.05 deg
16 & P215/60 17 Tire
Acceptable Settings
-0.35 to +0.45 deg
Cross Camber
Preferred Settings
0.0 deg
Acceptable Settings
0.50 deg
Caster
Preferred Settings
+1.40 deg
For Reference Only, Not Adjustable.
Cross Caster
Acceptable Settings
+0.40 to +2.40 deg
Total Toe
Preferred Settings
+0.10 deg
Total Toe is the sum of both left and right
wheel toe settings. Total Toe must be
equally split between each wheel to ensure
the steering wheel is centered. Plus toe is
toe-in, Minus toe is toe-out
Acceptable Settings
-0.10 to +0.30 deg
Maximum Side to Side
Preferred Settings
0.0 deg
Difference
Acceptable Settings
0.06 deg
Rear Alignment
Camber
Standard Fuel Engines
Preferred Settings
0.0 deg
All specifications are given in degrees.
For Reference Only, Not Adjustable.
All wheel alignments are to be set at
curb height. Refer to Curb Height
Measurement in Service Procedures.
Acceptable Settings
-0.25 to +0.25 deg
Alternative Fuel Vehicles
Preferred Settings
-0.10 deg
Acceptable Settings
-0.35 to +0.15 deg
Total Toe
Preferred Settings
0.0 deg
For Reference Only, Not Adjustable. Total
Toe is the sum of both left and right wheel
toe settings. Total Toe must be equally
split between each wheel to ensure the
steering wheel is centered. Plus toe is
toe-in, Minus toe is toe-out
Acceptable Settings
-0.40 to +0.40 deg
Thrust Angle
Preferred Settings
0.0 deg
