Town & Country SWB FWD V6-3.3L VIN G Flex Fuel (2000)
Ball Joint: Service and Repair
Lower Ball Joint
NOTE: To perform the following procedure, the lower control arm must be removed from the vehicle. Refer to Removal And Installation for that
procedure.
DISASSEMBLY
1. Using a screw driver or other suitable tool, pry the seal boot off of the ball joint assembly
2. Position receiving cup, Special Tool 6758 to support lower control arm when removing ball joint assembly. Install Remover, Special Tool 6919 on
the top of the ball joint assembly.
3. Using the arbor press, press the ball joint assembly completely out of the lower control arm.
ASSEMBLY
