Town & Country SWB FWD V6-3.3L VIN G Flex Fuel (2000)
1. Place the coil spring in the compressor following the manufacturers instructions. Proper orientation of the spring to the strut (once installed) is
necessary. Consider the following when placing the coil spring in the compressor: From above, the compressor back is at the 12 o'clock position
and you, standing in the front of the machine, are at the 6 o'clock position. For left side springs, place the lower coil spring end at the 7 o'clock
position. For right side springs, place the lower coil spring end at the 5 o'clock position.
2. Install the upper seat on top of the coil spring. Position the notch in the perimeter of the upper seat toward the front of the compressor.
3. Position the upper hooks on top of the coil spring upper seat so the upper hooks span the outer shoulder of the upper seat.
4. Compress the coil spring.
