chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Constant Velocity Joint Boot > < Constant Velocity Joint|Service and Repair
Page 2
background image

CAUTION:  If bearing shield is not installed flush against the face of the outer C/V joint, interference with steering knuckle will occur when
driveshaft is installed.

Fig. 43

(3) Using a hammer, drive the bearing shield on the outer C/V joint until it is flush against the front of the outer C/V joint (Fig. 43).

Constant Velocity Joint Boot > < Constant Velocity Joint|Service and Repair