Town & Country Van V6-201 3.3L VIN R SMFI (1990)
Brake Master Cylinder: Service and Repair
Master Cylinder Reservoir Replacement
Removing Reservoir
1. Clean housing and reservoir.
2. Remove caps and empty brake fluid.
3. Position master cylinder in vise.
4. Rock reservoir from side to side and remove from master cylinder housing.
CAUTION: Do not pry off with tool as this may damage reservoir.
Removing Grommets
5. Remove housing to reservoir grommets.
6. Install new housing to reservoir grommets in master cylinder housing.
7. Lubricate reservoir mounting area with brake fluid.
8. Place reservoir in position over grommets and seat reservoir with a rocking motion onto master cylinder housing.