Town & Country Van V6-201 3.3L VIN R SMFI (1990)
Figure 3 - Throttle Cable Attachment
(26) Install throttle and cruise control cables to the bracket and throttle body. (Fig. 3).
Figure 1 - Throttle Body Assembly 3.3L
(27) Reconnect the 2 injector harness electrical connectors to main harness.
(28) Install air cleaner cover and hose assembly (Fig. 1).
(29) Reconnect negative battery cable.
(30) Replace fuel tank filler cap.
(31) With the DRBII use ASD Fuel System Test to pressurize system to check for leaks.
CAUTION:
When using the ASD Fuel System Test, the Auto Shutdown (ASD) Relay will remain energized for 7 minutes or until the test
is stopped, or until the ignition switch is turned to the "Off" position.
Completion Reporting and Reimbursement
Claims for vehicles which have been serviced must be submitted by DIAL dealers on the DIAL System. Non DIAL dealers may submit WROs. Claims
submitted will be used by Chrysler to record recall service completions and provide dealer payments.
Enter only one VIN per claim on a WRO. Fill in the labor operation number and time allowance and write on the WRO "Customer Satisfaction
Notification # 466 -- Engine Valve Spring." Do not enter other service claims on the same WRO.
Use the following labor operation number and time allowance:
Labor Operation
Time
