Town & Country Van V6-201 3.3L VIN R SMFI (1990)
7. Remove caliper guide pins and separate caliper assembly from braking disc. SUPPORT CALIPER WITH WIRE HOOK AND NOT BY
HYDRAULIC HOSE. Remove braking disc.
8. Separate ball joint stud from knuckle assembly. Pull knuckle assembly out and away from driveshaft.
NOTE: Care must be taken not to separate the Inner C/V joint during this operation. Do not allow driveshaft to hang by inner C/V joint, driveshaft
must be supported.
9. Remove the four hub and bearing assembly mounting screws from rear of steering knuckle.
