Town & Country Van V6-229 3.8L VIN L MFI (1995)
Air Bag Control Module: Description and Operation
OPERATION
The deceleration or g-force resulting from the impact of a front-end collision causes the electronic sensor inside of the ACM to be triggered. This
causes the inflators to be actuated, thus deploying the air bags. The total time between determining to deploy and deflation of the air bag is 1/10th
of a second.
SELF DIAGNOSTIC FUNCTIONS
Whenever the ignition key is turned to the "RUN" or "START" position, the air bag control module (ACM) performs a lamp check by turning the
AIR BAG warning lamp ON.
-
The lamp stays lit for 6 to 8 seconds, then goes off. If the lamp remains off, it means that the ACM has checked the system and found it to be
free of discernible malfunctions. The air bag system is monitored by the ACM.
The ACM monitors critical input and output circuits within the air bag system, making sure they are operating correctly.
-
Some circuits are tested continuously; others are checked only under certain circumstances. The ACM provides diagnostic information about
the air bag system to the technician through the DRB via the CCD bus.
