chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Steering|Tie Rod > < Steering Gear|FWD|Page 7674
Page 1
background image

Steering Wheel: Service and Repair

1. Ensure front wheels are straight and steering column is locked, then disconnect battery ground cable.
2. Remove four air bag module attaching nuts from back of steering wheel, then lift module and disconnect rear module connector.
3. Remove vehicle speed control switch and connector.
4. Remove steering wheel retaining nut and pull steering wheel with puller tool No. C-3428B, or equivalent.
5. Reverse procedure to install. Torque steering wheel attaching nut to 45 ft. lbs.

Steering|Tie Rod > < Steering Gear|FWD|Page 7674