Town & Country Van V6-229 3.8L VIN L MFI (1995)
2. Remove nuts, bolts and retainers at control arms.
3. Remove crossmember clamp attaching bolts, then crossmember clamps.
4. Remove sway bar from vehicle.
INSTALLATION
1. Position crossmember bushings on sway bar with curved surface up and split to front of vehicle.
2. Position bar assembly onto crossmember, then install clamps and attaching bolts.
3. Position retainers at control arms, then install bolts and attaching nuts.
4. Raise lower control arm to correct position, then tighten attaching bolts to specifications.
