Town & Country Van 2WD V6-201 3.3L VIN R MFI (1996)
Sliding Door Inside Latch Release Mechanism
3. Remove screws holding release mechanism to handle.
4. Separate release mechanism from handle.
Sliding Door Inside Latch Button
5. Rotate latch release button away from mechanism until flats on button pivots align with slots in mechanism.
6. Separate button from release mechanism.
Installation
1. Place button in position on release mechanism.
Sliding Door Inside Latch Button
2. Align and engage flats on button pivots into slots in mechanism.
3. Rotate latch release button into mechanism.
4. Place release mechanism in position on handle.
