Town & Country Van 2WD V6-201 3.3L VIN R MFI (1996)
Trunk / Liftgate Lock Cylinder: Service and Repair
REMOVAL
1. Remove outside liftgate handle.
Lock Cylinder E-clip
2. Remove E-clip holding arm to lock cylinder.
3. Disengage arm from handle.
Lock Cylinder Removal
4. Disengage retainer holding lock cylinder to handle.
5. Pull lock cylinder from handle.
INSTALLATION
1. Install retainer into liftgate handle.
Lock Cylinder Installation
2. Push lock cylinder into handle until retainer clicks.
3. Install lock cylinder arm.