chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

A-Pillar Lower Extension|Page 10350 > < A-Pillar Lower Extension|Page 10348
Page 18
background image

Right Quarter and D-Pillar Trim Panels - LWB with A/C

INSTALLATION

1.  Position D-pillar trim on vehicle.

2.  Pass second rear seat belt, if equipped, through slot in trim panel on short wheel base vehicle.

3.  Engage speaker wire connector to speaker, if equipped.

4.  Align locating pins on backside of trim panel to mating holes in D-pillar.

5.  Engage hidden clips to hold trim to D-pillar.

6.  Install screws to hold trim panel to attaching bracket on short wheel base vehicle.

7.  Install quarter trim bolster on short wheel base vehicle.

8.  Install bolt to hold second rear seat belt, if equipped, anchor to quarter on short wheel base vehicle.

9.  Install second rear seat belt turning loop on long wheel base vehicle.

10. Install liftgate sill plate.

11. Install rear header trim cover.

Right Quarter Trim Panel-Left on Four Door

A-Pillar Lower Extension|Page 10350 > < A-Pillar Lower Extension|Page 10348