chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Customer Interest for Seat Latch:|234895 > < Rear Bench Seat To Floor Attachment - Rattle
Page 2
background image

9.

Install revised strikers P/N 4705796 (identified by their grooved top surface) at the 1st, 2nd and 5th positions on the right side of the vehicle.

10.

Raise the vehicle on an appropriate hoist.

11.

Install and torque the striker retaining nuts to 75-90 ft. lbs. (102-122 Nm).

12.

Attach the muffler heat shield.

13.

Lower the vehicle.

14.

Install the right rear seat anchor escutcheons.

15.

Install the rear floor mat.

16.

Install both rear bench seats.

POLICY: Reimbursable within the provisions of the warranty.

TIME ALLOWANCE: 
Labor Operation No:

23-41-00-90

0.6 Hrs.

FAILURE CODE:

P8 - New Part

Customer Interest for Seat Latch:|234895 > < Rear Bench Seat To Floor Attachment - Rattle