Town & Country Van 2WD V6-201 3.3L VIN R MFI (1996)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
CRANKSHAFT PULLEY REMOVAL
1. Disconnect battery.
2. Raise vehicle on hoist.
3. Remove right wheel ana inner splash shield.
4. Remove drive belt. Refer to Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair for procedure.
Fig. 41 Removing Crankshaft Pulley
5. Remove crankshaft pulley Fig. 41.
Fig. 42 Installing Crankshaft Pulley
CRANKSHAFT PULLEY INSTALLATION
1. Install crankshaft pulley Fig. 42.
2. Install drive belt. Refer to Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair for installation procedure.
B. Install inner splash shield and wheel.
4. Connect battery.