Town & Country Van 2WD V6-201 3.3L VIN R MFI (1996)
Mode Door Actuator Connector
3. Remove mode actuator connector.
Mode Door Actuator
4. Remove mode door actuator.
INSTALLATION
1. For installation, reverse the above procedures.
2. Perform the HVAC Control Calibration Diagnostic and Cool-down test. See: Testing and Inspection
Repeating the test is necessary to clear the fault codes.
Recirculation Door Actuator
REMOVAL
1. Pull back on carpeting on the right lower floor.
2. Remove Recirc. door actuator connector.
