chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Backup Lamp Switch > < About Diagnostic Procedures|Page 11310
Page 1
background image

Backup Lamp Relay: Description and Operation

During the week of June 5, 1995, a running change was made to St. Louis built vehicles equipped with 41TE transaxles that incorporated a Transaxle
Range Sensor (TRS).

Prior to that time, the 4 speed electronic automatic transaxle (EATX) used a back up lamp relay (located in the power distribution center).

With the incorporation of the TRS, the back up lamp relay is no longer used, for additional information, refer to Transaxle Range Sensor Description and
Operation,   See: Powertrain Management/Computers and Control Systems/Sensors and Switches - Computers and Control Systems/Transmission
Position Switch/Sensor

This article has been updated by technical service bulletin 211495 Dated Sep. 1, 1995.

Backup Lamp Switch > < About Diagnostic Procedures|Page 11310