Town & Country Van 2WD V6-201 3.3L VIN R MFI (1996)
Control Arm: Service and Repair
REMOVAL
1. Raise and support vehicle, then remove wheel and tire assembly.
2. Remove wheel stop, then the nut and bolt clamping knuckle to ball joint stud.
Fig. 13 Front Suspension Cradle Plate Mounting Bolts.
3. Remove 10 cradle plate mounting bolts, then the cradle plate from front suspension cradle.
4. With a suitable pry bar separate knuckle from ball joint.
CAUTION:
Do not damage ball joint seal.
