Town & Country Van 2WD V6-230 3.8L VIN L SMFI (1997)
Memory Seat/Mirror Switch
10. Engage wire connector into memory seat/mirror switch and install switch into trim panel.
11. install screws to hold accessory switch panel door trim.
12. Install screw cover into switch panel.
13. If equipped, Install window crank.
14. If equipped, install screws to hold trim panel door inside map pocket.
15. If equipped, install screw to hold door pull cup inner door panel.
16. If equipped install screws to hold door assist handle to inner door panel.
17. Engage wire connector into courtesy lamp.
18. Install lamp in door trim.