Town & Country Van 2WD V6-230 3.8L VIN L SMFI (1997)
12. Remove the leading brake shoe assembly to brake support plate hold down spring and pin from the brake shoe. Remove the leading brake shoe
from the brake support plate.
13. Remove the park brake actuator from the leading brake shoe and transfer to the replacement brake shoe.
Installation
WARNING: Although factory installed brake linings are made from asbestos free materials, some after market brake lining may contain
asbestos. This should be taken into account when servicing a vehicle's brake system, when after market brake linings may have been installed
on the vehicle. Always wear a respirator when cleaning brake components as asbestos can cause serious bodily harm such as asbestosis and or
cancer. Never clean brake components by using compressed air, use only a vacuum cleaner specifically designed for the removal of brake dust.
If a vacuum cleaner is not available, clean brake parts using only water-dampened shop towels. Do not create brake lining dust by sanding
brake linings when servicing a vehicle. Dispose of all dust and dirt suspected of containing asbestos fibers using only sealed air tight bags or
containers. Follow all recommended safety practices prescribed by the Occupational Safety And Health Administration (OSHA) and the
Environmental Protection Agency (EPA), for handling and disposal of products containing asbestos.
