Town & Country Van 2WD V6-230 3.8L VIN L SMFI (1997)
Brake Caliper: Vehicle Damage Warnings
CAUTION:
Grease and Contaminants
During service procedures, grease or any other foreign material must be kept off brake shoe assemblies, and braking surfaces of brake drum and
external surfaces of hub/bearing assembly.
Cleaning Pistons
When inspecting caliper piston, do not use anything but solvents to clean piston surface. If surface of piston cannot be cleaned using only solvents,
piston must be replaced.
NOTE:
Honing Procedures
When using Caliper Honing Tool No. C-4095, or equivalent, coat the stones and bore with brake fluid. After honing the bore, carefully clean the
seal and boot grooves with a stiff non-metallic rotary brush. Use extreme care in cleaning the caliper after honing. Remove all dirt and grit by
flushing the caliper with brake fluid; wipe dry with a clean, lint free cloth and then clean a second time.