Town & Country Van 2WD V6-230 3.8L VIN L SMFI (1997)
Cruise Control Servo: Service and Repair
Fig. 11 Speed Control Cable End
REMOVAL
1. Release hood latch and open hood.
2. Remove air cleaner resonator Refer to Fuel System for proper procedure.
3. Disconnect the throttle and speed control cable ends from throttle body.
Fig. 12 Speed Control Cable Case and Vacuum Line- Typical
4. Depress lock tabs holding speed control cable casing to cable mount bracket.
5. Disconnect vacuum line from nipple on air intake plenum.
6. Remove tie wrap holding vacuum line, throttle cable, and speed control cable together.
Speed Control Servo