Town & Country Van 2WD V6-230 3.8L VIN L SMFI (1997)
Evaporator
9. Carefully pull up on evaporator and remove from housing.
10. If replacing evaporator, drain and measure amount of oil from old evaporator and add new oil of the same amount (ND8 PAG) to the new
evaporator before installing.
Note: For reassembly of the evaporator housing, reverse the above procedures.
-
Perform the HVAC control Calibration Diagnostic and Cool-down test. Refer to: "Testing and Inspection" See: Testing and Inspection