Town & Country Van 2WD V6-230 3.8L VIN L SMFI (1997)
Turn Signal Bulb: Service and Repair
Park and Turn Signal Lamp Bulb
Park And Turn Signal Lamp Bulb
REMOVAL
1. From under front wheelhouse, remove access cover behind park and turn signal lamp.
2. Through access hole in wheelhouse, rotate park and turn signal socket counterclockwise one quarter turn.
3. Pull socket from back of lamp.
4. Pull bulb from socket.
INSTALLATION
1. Align key on bulb base to groove in socket and insert bulb into socket.
2. Through access hole in wheelhouse, insert socket into back of lamp.
3. Rotate park and turn signal socket clockwise one quarter turn.
4. Install access cover and verify lamp operation.